I have started using my RR again but I keep getting the message " no roadrunner USB device can be found" It used to work on this computer......and yet it still works on my old computer, help
Mike
I have started using my RR again but I keep getting the message " no roadrunner USB device can be found" It used to work on this computer......and yet it still works on my old computer, help
Mike
BT or USB?
What are the RR settings in the tune tool, it should be Virtual COM Port.
The USB port setting could be different too.
My sig has links for RR set up.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
I def says USB, Everything else is as it should be.
Mike
Open the device manager to see if it's visible or
try the USB View.exe in C:\Program Files\EFILive\Drivers\Utilities.
Check to see what port it's on and if it's in range of the RR settings.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Is that in usbview under utilities?
RR seems to work when I change from Virtual COM Port to Native port.......
Mike
The USB view is in the Utilities folder but you can use Device Manager as well,
check to see if the USB port properties matches what is shown here.
Quick-Start Guide for RoadRunner with EFI Live
If Native USB works for you then use that.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Im have issues connecting on both native and virtual with my usb road runner
it was working the other day but now that im going racing it has decided to quit?
Mr Prick i have followed the instuctions in that nice tutorial and still nothing? please help im dying to get this truck tuned!
2017 Trailblazer 2.5L Dmax
07 LBZ rc lb EFI - Sold
05 lly cc lb, EFI 80hp tune-Sold
01 lb7 rc lb EFI & Road Runner,1000+hp -Sold
Duramax power
my issue could be that i dont see a com port 9? i have 13-14 15 but no 9
i installed the drivers again and it say this device is ready to use when i plug in the rr usb
2017 Trailblazer 2.5L Dmax
07 LBZ rc lb EFI - Sold
05 lly cc lb, EFI 80hp tune-Sold
01 lb7 rc lb EFI & Road Runner,1000+hp -Sold
Duramax power
Use Virtual COM Port & scan all ports.
Make sure it is powered up in the car or you are using a powered USB port.
Moates took down the RR Quick Start Guide, here it is in Word.
Quick-Start Guide.zip
Man the layout of the forum really sucks now.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
thanks for the help but it did not help
im going to assume it is a bad cable since all the setting were ok and it was working a few days ago and now its not!
2017 Trailblazer 2.5L Dmax
07 LBZ rc lb EFI - Sold
05 lly cc lb, EFI 80hp tune-Sold
01 lb7 rc lb EFI & Road Runner,1000+hp -Sold
Duramax power