Can this be done?
I've tried several times, (shift F10) just replaced a wheel sensor but C0222 is still showing up, as blue icon/H(istory) when I scan for DTCs.
I swore I was able to do this before?
Got a V1 on my 2002 Sierra Denali with EFILive 7.5
Clearing history codes
Can this be done?
I've tried several times, (shift F10) just replaced a wheel sensor but C0222 is still showing up, as blue icon/H(istory) when I scan for DTCs.
I swore I was able to do this before?
Got a V1 on my 2002 Sierra Denali with EFILive 7.5
Last edited by Denaliano; March 5th, 2010 at 07:55 AM.
- 2002 GMC Sierra Denali Quadrasteer 6.0L AWD, 4.10s, K&N FIPK -
damn got it, yanked the abs fuse, cleared codes, came up as lost comm w/ebcm, shut down, put the fuse back, restarted, cleared codes, ALL GONE.
:thumbsup:
- 2002 GMC Sierra Denali Quadrasteer 6.0L AWD, 4.10s, K&N FIPK -
You have to go Info->Clear DTC's for all listed modules or SHIFT-F11...
but first you have to go Edit->Properties->Advanced and under Diagnostic Trouble Codes checkmark next to Check/Clear DTC's for all modules.
On this screen you can activate what modules you what to clear. Are the modules active when it is greyed or white?? (Using V1)Originally Posted by joecar
FWIW, EFI should change the programming so that it turns green when activated /on.
'02 S10 Xtreme 4.3 Syclone power; AWD, 4L60E; 411 PCM: Walbro 255; 160F thermo: Front coil overs, 4" static drop;
Posting Permissions
Reply With Quote