Log fuel pressure with Autometer sensor?

[joecar]

I think I know what was wrong with my calc_pids..I modded the spacing so that it looked nice and organized. I guess the coding doesn't like me to change the spacing?

This is kind of off topic, but...I was curious if there was some way I can hide the PIDs I never use. I know I can hide unsupported PIDs, but there is a lot of other PIDs I would like to hide.

Thanks

No, it wasn't spacing... spacing just helps me see it clearer (I told my editor to convert tabs to spaces and align everything)

It was this: CLC-00-010 specified units of EQR, but CALC.BEN_EQR1 specified units of factor (the units have to be the same).

(I can see where you got that, which is why I made a comment above regarding the little trick I used)

Technically the BEN is unitless... i.e. it is a factor.

[ I can do calc_pids.txt stuff in my sleep ]

[pullincrazy88]

will this work for my turk through the egr? it's a 2000 k-series with the 7.4 vortec running the 411 swap on cos3. would be using an AEM fp guage.