Not sure it will help; but, on a 2012 OS12653674, this works with out a starter resistor:
G1204 No
G1205 No
G1206 No
G1209 No
G1210 Type 2
G1211 Yes
G1214 3
G1215 1
G1216 No
G1213 No

Remember that your V2 MUST be connected to your laptop BEFORE you open your tune file to do a full flash. Otherwise even if the file recognizes the VATS patch it will not be applied during the flash. I'd also wait until after the tune file is opened before connecting the V2 to the OBD connector.

You should also apply the cooling fan patch to enable fan operation at lower temps.