Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: .cax file table numbering

  1. #11
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    He! he!... I'm just starting to get back into tuning the Burb....now that I have the dual 3" system on it.
    Had it running hard enough to snap the serp belt the other night. Lol!
    Gonna start looking into some of the 'extra' parameters a bit closer.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  2. #12
    Lifetime Member MICK's Avatar
    Join Date
    Mar 2005
    Posts
    226

    Default Hummmmmm

    Arrr so you got the extractors on yes?

    Had it running hard enough to snap the serp belt the other night.

    And on the seventh day the Good Lord invented nitro and Kevlar.
    Rev it up, Drop the clutch, See what happens?

  3. #13
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Lol! Yeah...extractors and twin 3" stainless system. It's amazing what can be accomplished on 'nightshift'.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  4. #14
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    As soon as I put the extractors and 3" system on....the tune was almost bang on. AFR is steadier than it was with the old exhaust. I guess being able to breathe makes quite a difference.

    Here's a thread on my progress.

    http://www.pacificp.com/forum/viewtopic.php?t=9658
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  5. #15
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Howard,

    Sorry mate, I don't have the offsets for your OS... I only have the ones for 12202088/01250003 and 12212156/0202005 which I got from Mick/5.7ute.

  6. #16
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    I should be able to change 12212156 to suit though....right???
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  7. #17
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by hquick View Post
    I should be able to change 12212156 to suit though....right???
    When I diff the old cax files for 12208322 and 12202088 they are identical in the address offsets.

  8. #18
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Hmmm...not sure I understand what that means Joe?
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  9. #19
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Howard,

    Lol, it was late for me...

    Is your COS3 based on 12208322...?

    What I mean is: edit whichever of those two files that has the address offsets closest to your current cax file (i.e. minimal editing).

  10. #20
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Email me a tune file Howard & I can check the .cax out for you.
    The Tremor at AIR

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Please explain table A0007 TPS VE TABLE cos5
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 18th, 2008, 05:26 PM
  2. OLFA table vs. Custom OS A0008 table
    By 1bar in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: January 6th, 2007, 05:25 AM
  3. Table Names vs Table Number
    By lplott in forum Custom Operating Systems
    Replies: 0
    Last Post: May 17th, 2006, 04:14 AM
  4. Main VE Table ?, Logged data vs VE Table
    By dbaxter_ss in forum Tips and tricks
    Replies: 1
    Last Post: December 26th, 2004, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •