smoothing spark table

[smslyguy]

smslyguy,

Take the calc_pids.txt file from post #21 and copy it to this folder:
My Documents\EFILive\V7.5\User Configuration.

If you're previous calc_pids.txt file in that directory already had calc pids, then save the file somewhere before copying over it.

The start the scantool, goto the PIDs tab, click on the "Parameter" column heading (this sorts alphabetically on this column), look down this column for CALC.LTFTBEN and CALC.VE_Table.

-------------------------------------------------------------

Regardless, you may want to update your software to the latest:
http://forum.efilive.com/showthread.php?t=13368

Do you have FllashScan V1 or V2...?
If you have V1 then you only need software V7.5.6.110.
If you have V2 then you need both V7.5.6.110 and V8.1.2.90.

I have done as you said and it isn't recongizing it. Can you send me that link or sticky again. Maybe it is cause of the format it is in don't know. But it is installed in the user configurations file, but it is not recognizing it.

I did upgrade to the newest build as well. I have a v1

[joecar]

Save the attached calc_pids.txt as My Documents\EFILive\V7.5\User Configuration\calc_pids.txt

Then browse to that folder and open calc_pids.txt with Notepad and make sure it contains 3 calc pids; close Notepad.

Then start the scantool, goto PIDs tab, click on the column heading of the last column (sorts alphabetically), scroll down til you see CALC.LTFTBEN and CALC.VE_Table...

post a screenshot of the PIDs tab.