Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: EFILive V7.3.0 Released

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default EFILive V7.3.0 Released

    Download here:
    http://www.efilive.com/downloads/downloads_7.html
    Please post any issues with the download or installtion in this thread.

    Regards
    Paul
    Before asking for help, please read this.

  2. #2
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    Exciting! We love a new, clean install.
    Thanks,
    Bruce

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

  3. #3
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    253

    Default

    Me, too!
    Old numbers with 422 Iron Block
    10.84 @ 124 MPH, 1.57 60\'
    549 RWHP / 757 RWTQ
    I'd rather be blown ... AND stroked!
    Now: 441 CID (Corevette 427) , ATI Procharger D-1SC Supercharger

  4. #4
    Unknown Zone TAQuickness's Avatar
    Join Date
    Jan 2005
    Posts
    2,940

    Default

    I've been needing this for a while!

    Check the lounge. A fellow over there was having install trouble with the msi

  5. #5
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,412

    Default

    hmm, looks like LC-1 calc and ben pids are slightly off in the sae-generic file.
    The numbers/discriptions dont match the formula's etc.

    --
    # Innovate LC-1 WBO2
    # ========================
    *CLC-00-934
    V 0.0 5.0 .1 "{EXT.AD1}"
    AFR 10.0 20.0 .2 "({EXT.AD1}*3)+7.35"
    *CLC-00-935
    factor 0.0 2.0 .1 "{CALC.AFR_LC11.AFR}/{GM.AFR}"

    *CLC-00-936
    V 0.0 5.0 .1 "{EXT.AD2}"
    AFR 10.0 20.0 .2 "({EXT.AD2}*3)+7.35"
    *CLC-00-937
    factor 0.0 2.0 .1 "{CALC.AFR_LC12.AFR}/{GM.AFR}"
    --

    CALC.AFR_LC11 F520 CLC-00-932 "AFR,V" O2-Wide "Wide Band AFR 1 - LC-1"
    CALC.BEN_LC11 F521 CLC-00-933 factor O2-Wide "Base Efficiency Numerator 1 - LC-1"
    CALC.AFR_LC12 F522 CLC-00-934 "AFR,V" O2-Wide "Wide Band AFR 2 - LC-1"
    CALC.BEN_LC12 F523 CLC-00-935 factor O2-Wide "Base Efficiency Numerator 2 - LC-1"
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by ringram
    hmm, looks like LC-1 calc and ben pids are slightly off in the sae-generic file.
    The numbers/discriptions dont match the formula's etc.
    Good catch, my bad :(
    Guess a patch is due out anytime now...

    Paul
    Before asking for help, please read this.

  7. #7
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,412

    Default

    Another thing I noticed was that on one PC the install didnt overwrite the custom cals. I had to copy them over the top. The stock ones got written ok.
    This was doing an over the top upgrade over pre 7.3.
    Maybe was my bad, but I dont think so.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by ringram
    Another thing I noticed was that on one PC the install didnt overwrite the custom cals. I had to copy them over the top. The stock ones got written ok.
    This was doing an over the top upgrade over pre 7.3.
    Maybe was my bad, but I dont think so.
    I guess that comes down to a "paranoid installshield algorithm" that says, if a file exists (and it is not part of any previous install), then don't overwrite it.

    The custom *.cals were not part of any previous install (i.e. V7.2.2). They were only ever made available as downloads from the web. To the installer, they appear as "foriegn" files - not to be overwritten.

    Another possibilty:
    Did you happen to copy the *.cal or *.tun files from one PC to another using a CD? If so they can get marked as "Read-only" which may cause the installer to not overwrite them.

    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    Lifetime Member mistermike's Avatar
    Join Date
    Dec 2003
    Posts
    363

    Default

    I edited my SAE_Generic.txt file to fine tune my LC-1's. I've obviously done manual installs up to this point. Should I rename my current file to preserve it before running the install routine? Does the installer automatically do all the .cal and .tun files?
    World's First Twin Screw Pontiac GTO
    2004 GTO. Blown H/C 408, stage 3 keyboard, billet tires
    2017 Chevy SS with dead hooker is spacious trunk
    2014 Chevy Cruze. MPG queen with my balls in spacious glove compartment.

    www.aussiemotive.com

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by mistermike
    I edited my SAE_Generic.txt file to fine tune my LC-1's. I've obviously done manual installs up to this point. Should I rename my current file to preserve it before running the install routine? Does the installer automatically do all the .cal and .tun files?
    If you have changed sae_generic.txt then save it and copy it back after the install - it will be overwritten during the install.

    I recommend deleting (or backing up and then deleting) all the *.cal files and the custom *.tun files (don't accidentally delete all your normal *.tun files) prior to installing. That way you know the new ones will be installed.

    If you've already installed, then you can just delete them anyway and re-run the install and select [Repair] to re-install the deleted files.

    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. YEAH! V2 is released!!!!
    By wait4me in forum FlashScan V2
    Replies: 42
    Last Post: November 21st, 2006, 03:42 PM
  2. When V2 is released Question?
    By kbracing96 in forum Purchase and Shipping
    Replies: 8
    Last Post: March 6th, 2006, 02:08 PM
  3. Is 7.2.3 going to be released by Saturday?
    By BowlingSS in forum General (Petrol, Gas, Ethanol)
    Replies: 25
    Last Post: August 14th, 2005, 07:47 AM
  4. Pricing on Upgrade for 98s when released?
    By dlandsvZ28 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: November 13th, 2004, 10:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •