Results 1 to 4 of 4

Thread: EXT.AD1 but no WO2AFR1

  1. #1
    Member
    Join Date
    Jan 2010
    Posts
    62

    Default EXT.AD1 but no WO2AFR1

    Just getting started with my tune. Hooked up LC-1 with display and it reads fine (output 1 is connected to FlashScan V1). Scantool shows proper voltage fluctuations for EXT.AD1 when monitoring, shouldn't WO2AFR1 be changing too? Thanks.

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    You want {CALC.AFR_LC11} for AD1 & LC-1
    EXT.WO2AFR1 is for serial WBO2 connection.

    {CALC.AFR_LC11} is for the factory programed output of the LC-1's analog#2 (brown wire)
    Read this post for more information on analog output settings.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    +1...

    EXT.WO2AFR1/2 are for serial wideband connection (FlashScan V2 only).

    EXT.AD1/2 are for analog wideband connection (V1 and V2).

  4. #4
    Member
    Join Date
    Jan 2010
    Posts
    62

    Default

    My bad. Thanks guys. Must read before posting....

Similar Threads

  1. EXT.WO2AFR1 invalid
    By 5.7ute in forum General
    Replies: 2
    Last Post: December 29th, 2008, 10:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •