Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: cant get stock tune off truck

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default cant get stock tune off truck

    i am trying to tune a 05 lly, it keeps telling me bootloader rejected check cables no communication from ecm.....it starts to read and wont go past getting status........i tried to pull radio fuse info fuse all other aftermarket electronics area removed have just got a new lisense and updated my efi what eles could it be????? thanks
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

  2. #2
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default

    i also unchecked the high speed and tried using alt keys, still would not work
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

  3. #3
    Senior Member
    Join Date
    Mar 2009
    Posts
    112

    Default

    Check for a blown cigarette lighter/power port fuse because it also powers the OBD port and if it's dead a scanner can't communicate.

    That one has gotten me a couple times on the GM trucks.

  4. #4
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default

    I checked aux fuses and all other cig fuses they are good, the conection to my laptop is fine scanner comes on, and also when I plug just into the truck it will come on,
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi browneflatwork,

    Can you copy/paste the text that shows up during your attempt into this thread...

    Thanks,
    Joe

  6. #6
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Is the scan tool connected while using the tune tool to read/write to the PCM?
    It should not be.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  7. #7
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default

    the text says......Connection to ecm has been lost please check all cabels and conections
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

  8. #8
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default

    i switched usb ports on my computer than got a Bootloader rejected :Reason no response from ECM
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Are you selecting the correct Controller...?

    I pm'd Tech Support.

  10. #10
    Junior Member browneflatwork's Avatar
    Join Date
    Nov 2009
    Posts
    24

    Default

    lly ecm.....truck is an o5 8th digit of vin is 2.........i also have a 05 lly and it tunes reads just fine no problems.....this truck aftermarket radio i pulled both radio fuses tried with and without info fuse in still nothing
    EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,

Page 1 of 3 123 LastLast

Similar Threads

  1. Help Please**** LLY With A LBZ Computer Stock Truck
    By Duramax 6.6L in forum Diesel
    Replies: 1
    Last Post: June 2nd, 2010, 11:48 AM
  2. Stock truck idle problems after flash..?
    By samh_08 in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: August 28th, 2009, 08:07 AM
  3. Tune for 07 6.0L truck?
    By 07.5duramax in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 25th, 2009, 04:54 PM
  4. Truck Tune
    By cmitchell17 in forum Gen III V8 Specific
    Replies: 5
    Last Post: May 13th, 2007, 01:25 PM
  5. Help with tuning stock truck
    By cmitchell17 in forum Gen III V8 Specific
    Replies: 115
    Last Post: February 23rd, 2007, 09:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •