Similar problem for me, Im having issues re-saving a *.tun into *.ctd format. I get an error as well, Ill have to check what it is when I get home.
As for the SD card, I popped mine from my freshly formatted and updated V2 into my laptop and uploaded a few tunes and logs directly from Windows Explorer.
If you went through EFILive HAPI Control Panel, then you should be fine!
Same for me, build 109.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Saving a modified tune as a *.ctd file using the V7.5.6 build 109 will result in the segment checksums not being updated in the *.ctd file.
The workaround is to save the file as a *.tun file first which will update the checksums, then without making any other modifications to the calibrations, use File->Save As to save it as a *.ctd file.
A fix (build 110) will be available asap.
Regards
Paul
Before asking for help, please read this.
That's why it worked on my LS1B, I saved already existing .tun files as .ctd.
I keep getting "ERROR: $0502 script file not found." Every time I try to flash a .ctd tune on my 06 Silverado LM7 5.3... I did all the stuff it said to do on the March 30 update thread.. Here's what files I got...
-John
:drivin:
1991 RCSB 2WD Sierra LQ4 swap, 220/224 112 cam, Twin VSR 6766 turbos
4L80e w/shift kit, PY 3600, and 3.73 gears.
22 PSI and E85, 4300# with driver. 9.7@138, 1.47 sixty
Send your Options.txt file to me at paul@efilive.com. You can save the Options.txt file by clicking on the [Save] button in the Black Box Setup window of the V8 Scan And Tune software.
Include a link to this thread in your email.
Regards
Paul
Before asking for help, please read this.
Ok I just tried it again and still no joy. Still getting the $0502 error. I even tried to Save As a new .tun file and then make a .ctd off that. And to recap. I have no problem performing a BBR and then BBF it back in.
A further update. I have installed the latest updates just then and tried again. Still no different. This time I even trimmed out all the controllers I don't use and updated my LS1B PIDS to what I use.
Attached is my options.txt file
[edit] the new firmware is not letting me BBR now. Comes up with error $0525 *.ctd file not compatible with firmware.