Wideband Controller Poll

[LinearX]

Per previous post I'd go the FJO w/ NTK sensor route if money was no object

I had less than stellar luck with my LC1. As a matter of fact, I cut the cables to the controller the other day so as not to subject anyone else to its worthlessness.

I'm thinking about the FJO as well. I see that KWB400x (version 3, I think) is supported, but I've yet to find a dual channel version of that one. Know of some place that sells the latest version of the dual channel kit so I can cringe over the price?

[Tordne]

They don't seem to do a dual channel (single product) anymore. You basically get two of the controllers and daisy chain them (like you would do with the LC-1). I'm actually considering a TechEdge 3H1 dual now, and considering using the Bosch sensors that came with the LC1-s initially.

[LinearX]

They don't seem to do a dual channel (single product) anymore. You basically get two of the controllers and daisy chain them (like you would do with the LC-1). I'm actually considering a TechEdge 3H1 dual now, and considering using the Bosch sensors that came with the LC1-s initially.

Can you daisy chain the serial outputs together and get them both into the V2?

I can never figure out what I need from the TechEdge site. It always confuses the crap out of me. I definitely like the idea of dual channel, though.

[Tordne]

I've never come across a dual channel FJO to "play with" but expect you could get both channels logged into V2 via the serial. The TechEdge 3H1(http://wbo2.com/3h1/default.htm) less the gauge which I wouldn't want comes in standard configuration of 3H1 controller, 2 x Bosch 7200 sensors, 2 x 2.6 M cable harness for AU$783. It's not nearly as confusing as working out what FJO stuff you need IMO

[LinearX]

I've never come across a dual channel FJO to "play with" but expect you could get both channels logged into V2 via the serial. The TechEdge 3H1(http://wbo2.com/3h1/default.htm) less the gauge which I wouldn't want comes in standard configuration of 3H1 controller, 2 x Bosch 7200 sensors, 2 x 2.6 M cable harness for AU$783. It's not nearly as confusing as working out what FJO stuff you need IMO

I think where I get lost is how they refer to the sensors. I'm dumb and accustomed to the Bosch LSU (in some version) or the NTK. I've got a friend that has had a TechEdge for a long, long time and it still works like a champ. I should revisit their stuff.

[joecar]

Can you daisy chain the serial outputs together and get them both into the V2?
...

On the LC-1...?

First LC-1:
SERIAL IN = terminator plug.
SERIAL OUT = serial in of second LC-1.

Second LC-1:
SERIAL IN = serial out of first LC-1.
SERIAL OUT = FlashScan V2 RJ12 serial port (using null modem connection).

[Tordne]

I think the FJO product would work similar to the LC-1 scenario above.

[Highlander]

Over 10 LC1s and a few LM1s with serial connections... No issues here... That serial connection is just so awesome it makes the system worthwhile for tuning.

[LinearX]

Can't find an FJO KWB4001 for sale in the entire country. It seems that everyone is out of stock and FJO appears to be back ordered.

Techedge may be my next option.

[Abdulla]

Innovate LC-1 (Linked)