Tuning for E10

[WHYTRYZ06]

ute,

when i changes the settings on the lc1 to 14.12 afr the lambda values stayed the same, but the afr values changed....why?

[5.7ute]

Ute wait thats for the factory gas settings ill need to do one for my E10 AFR...hold up 1 sec

lemme go back and set my e10 afr in the lc1

Doh.

[WHYTRYZ06]

What is in {B3601}?

i already said, 14.12 afr....

[WHYTRYZ06]

Doh.

the lambda settings stayed the same

[5.7ute]

ute,

when i changes the settings on the lc1 to 14.12 afr the lambda values stayed the same, but the afr values changed....why?

Yeah, thats fine. Like I said earlier the AFR part is only for the wideband display. It will just need a bit of thinking to get the Efilive pid worked out.

[joecar]

Yes it does do contortion on the brain...

[mr.prick]

this is what it reads....

analog 1
0v 10 afr
5v 20 afr

0v 0.680 lambda
5v 1.360 lambda

this is what hooks up to my AD1 on efilive

is that what ur looking for?

i already said, 14.12 afr....

With all these settings the expression is:
({EXT.AD1}*1.9203)+9.602

2.35 volts = 14.12 AFR
2.35 volts = 1.00 Lambda

[WHYTRYZ06]

Yeah, thats fine. Like I said earlier the AFR part is only for the wideband display. It will just need a bit of thinking to get the Efilive pid worked out.

so can u come up w something? joe already posted his on my other thread...

[5.7ute]

What did the AFR values change to?

[5.7ute]

Awesome work on the spreadsheet mr.prick.