Results 1 to 2 of 2

Thread: 105 kpa in boost ve table (cos3)

  1. #1
    Junior Member
    Join Date
    May 2005
    Posts
    38

    Default 105 kpa in boost ve table (cos3)

    I have a quick question. Do the 105kpa from the main ve table and boost ve table have to have the same value or can the boost ve table 105kpa be higher?

    Thanks,
    Frank
    64 Chevy II, twin turbo 402 LS1, TH400, Dana 60.


  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    I suspect you "could" make it higher. But it really should be the same just by virtue that that is MAP value so the VE "should" be the same irrespective of boost or not.
    Andrew
    EFILive Crew


Similar Threads

  1. COS3 fueling issue under boost
    By joeygc5 in forum Custom Operating Systems
    Replies: 4
    Last Post: December 28th, 2009, 05:07 PM
  2. Main and Boost VE...one table?
    By hquick in forum Custom Operating Systems
    Replies: 9
    Last Post: February 20th, 2008, 06:10 PM
  3. IFR Table and Boost
    By DrX in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 1
    Last Post: February 22nd, 2006, 12:12 PM
  4. boost tuning - 105 kPa table
    By SS2win in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 8th, 2005, 01:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •