Just looked at a few files on HoldenCrazy.com, didnt see a ETC OS with an 80E, I thought I might get lucky with the 8.1L OS, but they use the Allison 1000 trans.
Might have to do the 80E using a 60E OS for now.
Just looked at a few files on HoldenCrazy.com, didnt see a ETC OS with an 80E, I thought I might get lucky with the 8.1L OS, but they use the Allison 1000 trans.
Might have to do the 80E using a 60E OS for now.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Please don't tell me that! If I have to do some more wiring mods it will have to be free because I think I already earned all the money he had. Plus Aric needs that truck done and gone and I am in the middle of a '98 Vortec 5.7 injection swap in an '86 K1500 at home. So I really don't need to pull off of it until I'm done.
The C/K truck platforms had the 4L80E as an option (it shows up in my 2005 Service Manual DVD)...
someone somewhere must have 1MB LS1B 4L80E file.
Thank you both for the help so far. I'm going home for the night, but Aric may be back on. I'll bring my laptop to work tomorrow in case we can come up with a solution so I can go to Injected Engineering after work.
Thanks again!
Brint
That's a 1MB 4L80E 12613248 file with Flex-Fuel and ETC. Edit: I looked closer at that file and I saw FF set to No.
The 1MB 4L60E 12606807 file on www.holdencraqzy.com also has FF and ETC.
One would think those OS's are compatible, but I don't want to make an assumption, let me ask someone...
Last edited by joecar; April 21st, 2010 at 02:42 AM.
Do you mean that Aric may be able to use an OS for a flex fueled engine and just calibrate the engine segment (which he still has to do anyways, turbo setup)?
I have a friend about 2 miles down the road who has a stock 07 2500hd 6.0 ETC 4L80E, and he says its not a Flex-Fuel. Can I just go down there and pull his .tun file and give it to Aric, or does doing an entire OS upgrade involve more than that? In case we don't get super lucky and have the same OS as the truck Aric is working on.
Thanks
Brint
I think the attached files will do the job for you.
1Mb PCM
4L80E
Non Flex Fuel
ETC
6.0L
The 2006 Hummer 12613246 OS is the closest to the one you already have, in fact it was an update to the one you have, so I'd suggest full flashing that in.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Thank you very much GMPX, and all! Aric will soon be a proud new owner of EFILive. Will post results tomorrow, not that you or I have any doubts.