Results 1 to 3 of 3

Thread: Knock sensor multiplier (6244, 45, 50 & 55) TPS, RPM and

  1. #1
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,412

    Default Knock sensor multiplier (6244, 45, 50 & 55) TPS, RPM and

    Hi all,
    Seems like there isnt much discussion of info on these tables anywhere.
    I had a persistent drag on my spark table which I posted about before. It was suggested that I sort out my wideband first before attacking the cause.
    Ive done this and made a few passes at BEN.
    Still I was getting knock at very low throttle and map ranges. LIke 0.60 g/cyl.
    Anyway I discovered that later year LS1's had substantial changes to the above tables. Once I had copied these tables from an 04 into my 00 cal things got much better, in fact Id almost say fixed.
    I had logged the DMA spark tables earlier but not found the culprit. I think I have now.
    It appears that its for tuning knock sensitivity across cylinders, rpm and tps variables.
    Anyway just wanted to write something up about it in case someone else was getting weird timing issues.

    BTW: I have not heard any "real" knock, so hopefully all is well.

    Let me know if you think Im committing murder on my little alloy friend.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  2. #2
    Lifetime Member oztracktuning's Avatar
    Join Date
    Nov 2005
    Posts
    594

    Default

    How did you progress with this strategy Ringram?
    Oztrack
    EFILive Tuning Consultant

    Worldwide Remote Tuning Service

    2006 NSW Super Street Drag Racing Champion

    www.oztrack.com.au


  3. #3
    Lifetime Member Bruce Melton's Avatar
    Join Date
    Oct 2003
    Posts
    674

    Default

    Maybe we can relate this?

    Seems we are engouraged to use LS1 type sensors removed from under the intake and move them to outside of block when doing Gen 4 engines into <05 cars. This is clunky and troublesome.
    Is there a software fix to allow the use of the newer knock sensors on opposite sides of the block as configued in the newer cars ??

    2000 C5 Coupe, 6M, Callies/Mahle stroked LS7 (441), Blackwing, Halltech, LS3 intake, 90mm Shaner TB, ported L92 heads, FAST 50# inj, not too much cam, Kooks 1 7/8" headers , 3" catless mid pipes, Z TIs, track suspension, , 3:90 rear, EFI V2, LM-2, etc.
    PowrMax Performance

    100 mm PowrMAF

    LM-2 EFILIve package with TAQ -sLM2 V-2 serial cable> Package deals

Similar Threads

  1. Knock Sensor Tuning
    By TBMSport in forum Gen III V8 Specific
    Replies: 9
    Last Post: November 24th, 2009, 08:34 PM
  2. Knock Sensor
    By BRD-PREY in forum Gen III V8 Specific
    Replies: 4
    Last Post: November 17th, 2009, 12:24 AM
  3. Turning off Knock sensor?
    By SinCity-Z in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: February 13th, 2007, 01:52 PM
  4. LS1 to LS2 knock sensor question
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: April 26th, 2006, 01:09 AM
  5. Knock Sensor Logging
    By daveb in forum General
    Replies: 3
    Last Post: July 29th, 2005, 10:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •