Results 1 to 3 of 3

Thread: Misfire tables missing

  1. #1
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default Misfire tables missing

    I have a 2010 suburban operating system 12636005 the misfire tables are missing. I have done 09 suburbans with know probems. after looking at this one seems to be left out any ideas or am I over looking something.It has misfire folder and parameters but no tables listed after that.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    They are missing because GM keep changing them, we haven't figured the new structure.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member
    Join Date
    Dec 2005
    Posts
    358

    Default

    ok I know you have millions of things going on but is that some thing you will be working on soon ? I only ask because I been doing motors and tunes for 3 years for this company and they get sent out of the country they are armered suburbans and cost very much money to build so a check engine light freaks them out.The last 2 years they been shiping me motors and computers then I engine dyno them to test the motors then ship ecms with suburban tune. I did the org.tune on chassis dyno so thats what I copey off of not sure if I can get buy with out changing missfire tables or not they are small cams pretty smooths running.

    thanks again

Similar Threads

  1. Fuel Pressure Question - Missing Tables?
    By Jack_the_Diesel_Killer in forum General (Diesel)
    Replies: 0
    Last Post: May 16th, 2009, 04:24 AM
  2. E38 Missing tables? Or I'm missing something?
    By gmtech16450yz in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: January 7th, 2009, 02:28 PM
  3. E38 Misfire DTC
    By macca_779 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: October 19th, 2007, 10:18 PM
  4. misfire help
    By NviouSS in forum General
    Replies: 6
    Last Post: June 3rd, 2006, 05:18 AM
  5. Modifying misfire detection tables ?
    By kp in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: May 13th, 2005, 01:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •