Originally Posted by
Tordne
When you format the SD Card did you do that while it was in the V2, or from a PC/laptop? If it was from a PC then the necessary folder structure would not have been created and I might expect those error messages in that case.
I recommend the following:
- Insert the SD Card into the V2.
- Open EFILive Explorer.
- Change to the 'Config Files' tab.
- Click on the 'Format Config' button.
- Close EFILive Explorer.
- Check the 'File sys:' setting on the V2 by pressing the F4-F1-F1 keys. The change the option use the right/left arrow keys and then press the 'OK' button to confirm selection. Perform the following steps with the setting change to both 'Internal' and 'SD Card'.
- Open EFILive Explorer.
- Change to the 'Data Files' tab.
- Click on the 'Format Data' button.
What that will hopefully achieve is a clean format of the Config Filesystem, Internal Data Filesystem, and the SD Card Data Filesystem.
Please let us know how that goes.