Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: 411 swap in a 97 s10 vortec v6

  1. #1
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default 411 swap in a 97 s10 vortec v6

    Hi a while back some guys were trying to get the 411 swap into an older vortec vehicle and engine. They said they were going to release the pinouts when this swap was proven it worked. I see it has worked. Is there somewhere on this forum that shows various pinouts for various vehicles and pcm's? My brother has a 1997 S10 with a 4.3 vortec v6 5spd. We are currently turbocharging it, and want to install the 411 pcm for boost control. Im hoping I dont have to pay at alldata to find the wiring info I need. Is their a link someone could put up on this forum to find that info? Ive searched here with no luck yet. Thanks Keith

  2. #2
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default

    I must have asked a silly question here?

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    No, just be persistent... if you know who they are send them a pm.

  4. #4
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default

    I know who to ask ,lol but I havent talked to him before dont want to be pushy I guess. But thanks for the tip.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Introduce yourself, explain that you saw their thread, explain your situation, and ask politely for the information... and if you have some info now or later be willing to volunteer it... I'm sure they will give you a nice reception.


  6. #6
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    SlowS10,
    PM me your E-Mail address and I will send you the wiring file.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  7. #7
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default

    Ha Ha you knew I was talkin about you. That thread of yours was great. I was gettin ready to ask you, was just doing a little reading and searching on here thanks alot. Keith

  8. #8
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default

    Did you get my pm lextech?

  9. #9
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    Have patience grasshopper. I don't live on the computer.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default


Page 1 of 3 123 LastLast

Similar Threads

  1. 7.4L vortec swap help
    By Moonlight in forum Vortec V6/V8 Specific
    Replies: 25
    Last Post: November 28th, 2012, 02:04 AM
  2. 4.3 vortec swap
    By Hatchetman in forum Vortec V6/V8 Specific
    Replies: 21
    Last Post: May 24th, 2010, 07:15 AM
  3. vortec v6 to vortec v8 swap
    By grezzmky in forum Vortec V6/V8 Specific
    Replies: 6
    Last Post: September 21st, 2009, 05:49 AM
  4. 1997 v 6 vortec swap
    By wyoben in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: September 16th, 2009, 02:14 PM
  5. V6 vortec swap
    By MaxOD in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: October 3rd, 2007, 11:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •