Results 1 to 5 of 5

Thread: COS 3 Question

  1. #1
    Lifetime Member
    Join Date
    Apr 2007
    Posts
    272

    Default COS 3 Question

    Hi,
    I have a couple questions about COS 3 for a low boost (5-6 psi) application.

    - Can you keep the stock MAP sensor?
    - Can you still use the MAF and CL for normal driving and have it switch to the boost VE table for WOT?
    - Does the PE modifier based on RPM still controls the WOT AFR for boost or does it automatically switch the boost VE table based on MAP readings?

    Any help is appreciated.

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    6 PSI equates to 40 kPa which is a reasonable amount (approx. 40%) above the 101 kPa of atmospheric pressure, and pressure that the stock MAP will support.

    I'd definitely suggest a 2 BAR MAP sensor otherwise you will not have any resolution between 101 and ~140 kPa. This will restrict the ability to fine tune fuel which I'd think would be fairly critical for you.

    Others may have a different view...
    Andrew
    EFILive Crew


  3. #3
    Member
    Join Date
    Jun 2007
    Posts
    90

    Default

    what did you boost? I'm working on a 2001 ta with twins right now with a 1 bar map it's not real fun to tune.
    cosmos purple 2004 gto
    408 E85 GT47-91 ,turbo 400,9" currie straight axle,28/10.5w mt et streets



    2005 yellowjacket gto
    417 rwhp and 397 torque
    582 rwhp and 676 torque (150 shot)

  4. #4
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    You should definitely get the 2 bar map sensor if you are planning to boost up to 210KPA. You have gone to the trouble and expense of turbocharging and EFILive. Why not give the PCM the correct info it needs.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  5. #5
    Member
    Join Date
    Jun 2007
    Posts
    90

    Default

    told my customer today he needs a two bar
    cosmos purple 2004 gto
    408 E85 GT47-91 ,turbo 400,9" currie straight axle,28/10.5w mt et streets



    2005 yellowjacket gto
    417 rwhp and 397 torque
    582 rwhp and 676 torque (150 shot)

Similar Threads

  1. Desired Airflow Question, not your normal question
    By Dale in forum General (Petrol, Gas, Ethanol)
    Replies: 25
    Last Post: October 1st, 2010, 10:10 AM
  2. Locked out timing question for boost setup question??
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: September 13th, 2005, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •