Results 1 to 2 of 2

Thread: DSP5 not switching voltages

  1. #1
    Senior Member lakingslayer's Avatar
    Join Date
    Dec 2005
    Posts
    180

    Default DSP5 not switching voltages

    I installed the 02 OS in a buddy's '01 truck. Now he installed a DSP5 switch. We've been having trouble getting voltage on the switch. He's checked, double checked and even now tripple checked the pins on the ECM. They are seated and in the correct positions. I checked the switch and the resistor values are correct and they switch properly. I did notice the resistance from the ECM pin to ground is about 80ohms. Is this correct?


  2. #2
    Senior Member lakingslayer's Avatar
    Join Date
    Dec 2005
    Posts
    180

    Default

    After the 3rd time rebuilding the tune we got it to work. Not sure what I did differently. I followed the tutorial step by step each time.

Similar Threads

  1. DSP5 Voltages
    By ruralgas in forum Duramax LLY
    Replies: 4
    Last Post: May 17th, 2010, 04:36 PM
  2. Switching DSP5 tunes with V2 module
    By kdawg62 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: May 4th, 2010, 01:18 PM
  3. V2 DSP switching
    By musclecar400 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: August 27th, 2009, 08:18 AM
  4. Innovate LM-1 Voltages.
    By curtbriggs in forum General
    Replies: 2
    Last Post: September 4th, 2005, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •