What PIDS do I need to log a vve on the E38 and E67 ecms. I using a LM1 with serail cable. I just want to make sure i use the correct pids when i logg a file.
What BEN do i need and all all the other pids for serail data. thanks
What PIDS do I need to log a vve on the E38 and E67 ecms. I using a LM1 with serail cable. I just want to make sure i use the correct pids when i logg a file.
What BEN do i need and all all the other pids for serail data. thanks
also what do I need to change and thing else. like changing the outputs in the lm 1. Im not sure. Im new a using the WBO2
For the serial wideband, log these:
EXT.WO2AFR1
EXT.WO2LAM1
EXT.WO2EQR1
EXT.WO2ST1
The BEN pid is CALC.BEN1.
You don't have to change the outputs of the LM-1.
Be sure to update your software/firmware, see here: showthread.php?t=13550
do i use the BEN factor serial wideband E38 style for the E38 and E67
Ah, yes ,you're right...
CALC.BEN1_E38... do rightclick->More info and you will see that you also need E38.AFRATIO_DMA.
For throttle position log GM.APP.
Log, RPM, MAF, MAP, VSS, LONGTFT1/2, ECT, IAT... and a few others.
is it not throttle app_dma pid to log for throttle position
97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1
stock sucks
Which builds of V7.5 and V8.1 do you have installed...?
The latest are V7.5.6.116 and V8.1.2.97 (includes firmware 2.6.35 and bootblock 2.6.3) available here.
I had the up to date V8.1.2.97, downloaded V7.5.6.116. Have bootblock V2.6.3. Thought the updater should have taken care of downloading the latest software.
Rebooted and still don't have the PID for EQ Ratio for the EXT wideband.
I'm not seeing the CALC.BEN1 PID either. Reloaded the updates and have CALC.BEN1, but still no EQR1.
Last edited by SOMhaveit; May 22nd, 2010 at 02:51 AM.
On the PIDs tab, click on the column heading "Parameter" (i.e. on the column heading itself) to sort on that column...
then scroll down that column until you see the EXT.WO2 pids...
then scroll back up until you see CALC.BEN1.
[ I think the updater will take care of it from now on ]