There are scores of temp dependent multiplier tables in these tunes, IAT, ECT correction etc. The axes are not labled Farenheit or Centigrade. Should I assume deg C?
Could the next release address this?
There are scores of temp dependent multiplier tables in these tunes, IAT, ECT correction etc. The axes are not labled Farenheit or Centigrade. Should I assume deg C?
Could the next release address this?
Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
Custom Tuning Services
DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
EFILive's first VGT "Software Wastegate Tune"
The tables I quickly looked at showed the units, which ones aren't you seeing this on?
To answer your question though, all ECM's (apart from the Cummins) are coded in Metric.
I no longer monitor the forum, please either post your question or create a support ticket.
B1074 for example.
Thanks!!
Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
Custom Tuning Services
DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
EFILive's first VGT "Software Wastegate Tune"
I would bet by looking at those 6 tables that they are in metric and are not convertible to imperial. (ECT and IAT)
'07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that
'06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor
465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME
ALL temp tables in the ECM are in metric, we have to define the conversion for imperial, sorry but I didn't do a 100% thorough job on the E35. I need to make a couple of corrections for the E35 cals so I will endeavour to define both metric and imperial for all relevant tables.
I no longer monitor the forum, please either post your question or create a support ticket.