Results 1 to 5 of 5

Thread: Many Multiplier Tables, F or C

  1. #1
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default Many Multiplier Tables, F or C

    There are scores of temp dependent multiplier tables in these tunes, IAT, ECT correction etc. The axes are not labled Farenheit or Centigrade. Should I assume deg C?

    Could the next release address this?
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    The tables I quickly looked at showed the units, which ones aren't you seeing this on?
    To answer your question though, all ECM's (apart from the Cummins) are coded in Metric.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default

    B1074 for example.

    Thanks!!
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  4. #4
    Lifetime Member
    Join Date
    Jan 2008
    Posts
    1,169

    Default

    I would bet by looking at those 6 tables that they are in metric and are not convertible to imperial. (ECT and IAT)
    '07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that

    '06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
    Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor

    465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    ALL temp tables in the ECM are in metric, we have to define the conversion for imperial, sorry but I didn't do a 100% thorough job on the E35. I need to make a couple of corrections for the E35 cals so I will endeavour to define both metric and imperial for all relevant tables.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. COS 5 Fuel VE multiplier
    By Highlander in forum Custom Operating Systems
    Replies: 8
    Last Post: October 25th, 2022, 05:56 PM
  2. Setting up A0015 VE MULTIPLIER
    By WHYTRYZ06 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 2
    Last Post: March 29th, 2008, 11:12 PM
  3. Math for the VE multiplier
    By Beer99C5 in forum Custom Operating Systems
    Replies: 13
    Last Post: September 8th, 2007, 12:56 AM
  4. IAT VE Multiplier - multiplies Boost VE tables also?
    By Draco in forum Custom Operating Systems
    Replies: 1
    Last Post: June 15th, 2006, 04:02 AM
  5. New IAT VE Multiplier Table
    By GMPX in forum General (Petrol, Gas, Ethanol)
    Replies: 28
    Last Post: October 23rd, 2005, 02:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •