How do I format a script to copy with labels from one table to another?
How do I format a script to copy with labels from one table to another?
Last edited by mr.prick; December 29th, 2009 at 06:15 PM.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
CC= = Copy one calibration to another.
CC+ = Add one calibration to another.
CC- = Subtract one calibration from another.
CC* = Multiply one calibration by another.
CC/ = Divide one calibration by another.
I havent tried these commands in a script file yet but they are there. From the script file examples
; Copy entire high octane spark map to low octane spark map
ID CAL ADJ VAL
50= B5914 CC= B5913 .
Last edited by 5.7ute; December 29th, 2009 at 06:17 PM.
The Tremor at AIR
I know about those but it won't copy the high/low spark table to the base spark table,
the rows are not the same so it doesn't work.
I know there is a way do it but not with those simple functions.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________