Thanks for sending the VIN through. Unfortunately your vehicle is using an ECM type that we don't support.
Thanks for sending the VIN through. Unfortunately your vehicle is using an ECM type that we don't support.
Andrew
EFILive Crew
Darn... Thanks!
-John
:drivin:
1991 RCSB 2WD Sierra LQ4 swap, 220/224 112 cam, Twin VSR 6766 turbos
4L80e w/shift kit, PY 3600, and 3.73 gears.
22 PSI and E85, 4300# with driver. 9.7@138, 1.47 sixty
Bump !!!!!!
Not sure why you're bumping?
Andrew
EFILive Crew
I noticed that there were several V6 3.8, 3.1 threads. Then I found this
It seems like each thread that shows interest pops up one at a time with
say 3 or 4 users then disappears, so at any given time it might not seem
worthwhile. I even had my own thread about this and I can't seem to
find it now.
Correct, for EFILive to invest a month or so on development for cars approaching 10 years in age to serve 20 to 30 users at best would be rather silly.
I no longer monitor the forum, please either post your question or create a support ticket.
OK I'm done..........I don't mean to get myself baned........I thought there might be hope.
Honestly, I firmly believe you would hag ALOT more than 20-30 people interested in this, the problem is most tuners don't know of these cars don't even know EfiLive exists. If EfiLive supported these cars, you would receive quite a few more customers. There are ALOT or people modding these cars all around the country but only 1 tuning tuning software that I'm aware of, starting with the letters "HP", if you know what I mean. IMO, this EfiLive is a lot more user friendly, so I would LOVE to see this software support all 3.8L engines. Just my $.02
-John
:drivin:
1991 RCSB 2WD Sierra LQ4 swap, 220/224 112 cam, Twin VSR 6766 turbos
4L80e w/shift kit, PY 3600, and 3.73 gears.
22 PSI and E85, 4300# with driver. 9.7@138, 1.47 sixty
Well I thought I would generate interest instead I generated "support will NEVER be offered"
Just on these, I know Tunercat supports them, they also offer a .tdf editor don't they? So you could create however much mapping support you want. There seems to be a handful of people out there who do have an intimate knowledge of this PCM.
I no longer monitor the forum, please either post your question or create a support ticket.