Results 1 to 2 of 2

Thread: Fuel and RPM limit question...

  1. #1
    Lifetime Member LBZoom's Avatar
    Join Date
    Jun 2008
    Posts
    452

    Default Fuel and RPM limit question...

    Hey guys,
    Quick question, in the pedal position to desired torque table the RPM columns jump from like 3550 up to 4800 and the rpm range in between is not shown...will the truck use the values from the 3550rpm column all the way up until it hits the 4800 rpm column?

    Thanks!
    Peace Through Torque

    Punisher Performance DSP5 Tuning, PPE Dual CP3's, 68mm Fleece Cheetah, Punisher Built trans w/ Suncoast Parts, Airdog 165, SoCal 100% Overs, ARP Studs

    2013 NHRDA Sportsman World Champion

    www.PunisherPerformance.com

  2. #2
    Lifetime Member
    Join Date
    Jan 2008
    Posts
    1,169

    Default

    Yes the ECM will extrapolate the correct values based on the 3550 and the 4800 column.
    '07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that

    '06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
    Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor

    465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME

Similar Threads

  1. Question on a LBZ fuel rail pressure?
    By Tarkstoys in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 19
    Last Post: November 30th, 2009, 06:45 AM
  2. Question on Fuel System
    By Randy07GMAX in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: June 17th, 2008, 05:13 PM
  3. AutoVE Commanded Fuel Question
    By SOMhaveit in forum General (Petrol, Gas, Ethanol)
    Replies: 24
    Last Post: October 9th, 2007, 11:35 PM
  4. Another dumb fuel pressure question.
    By ViolatorTA in forum Gen III V8 Specific
    Replies: 26
    Last Post: June 11th, 2007, 12:31 PM
  5. HELP! can't keep off the rev-limit/fuel-cut
    By white2001s10 in forum General (Petrol, Gas, Ethanol)
    Replies: 29
    Last Post: February 27th, 2007, 12:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •