Trying to get some logs from my truck and an error keeps coming up saying "Error code: ERR_RESPONSE/5
Response $11: "Mode Not Supported".
Anyone know why this would be, or how to go about fixing the problem so I can log?
Thanks
Mike
Trying to get some logs from my truck and an error keeps coming up saying "Error code: ERR_RESPONSE/5
Response $11: "Mode Not Supported".
Anyone know why this would be, or how to go about fixing the problem so I can log?
Thanks
Mike
I suspect you have a PID selected which is invalid for your vehicle.
As a test select one of the generic PID lists intended for your vehicle and see if you can scan/log data.
Andrew
EFILive Crew
Thank you sir, I had the LBZ Imperial for PID, and I had a few more pid's selected. Then I thought I tried it again with just the LBZ Imperial and no others I think. I will try it again tommorow to make sure. The plain LBZ Imperial should work shouldn't it?? What other generic PID should I try?
Thanks
Mike
Edit: My truck is an 08 LMM
Yeah just try selecting the LBZ Imperial PID list and don't add any additional PIDs. Then make sure you can log that OK and confirm there isn't another issue. I'm going to bet on it working and that one of the PIDs was not supported.
Last edited by Tordne; June 13th, 2010 at 03:44 PM.
Andrew
EFILive Crew
Nah I reckon the LBZ Imperial PID list will work and that one of the additional PIDs you selected was not supported.
Andrew
EFILive Crew
I tried doing the LBZ Imperial again and got the same error message. So I tried the other Duramax PID's like "Duramax metric" and "LBZ Metric" and they worked but the LBZ Imperial wouldn't.
The LBZ Metric and Imperial PID list is exactly the same (hadn't checked for a while). So it is therefore "odd" that one works and one does not, unless you actually made the change to the default PID list and saved it?
Andrew
EFILive Crew