COS 3 auto VE and boost (reduced engine power")
Im in the process of doing my auto ve with cos 3 and boost ve, while going into boost at a high kpa the truck goes into "reduced engine power" this happened after the first logging session.
It happens when it hits high boost about 7 lbs, i have raised the etc table by 40%
Im also on OLSD, any Ideas?
modsare 6.0 lq4 72lb injectors, t76mm turbo at 7lbs
tune:
I don't have my software here in front of me, it is easy, go to diagnosing section and increase ( by 50 %) the ETC, MAP values. I will check it for you later.
Regards,
Odd Boy
still cant figure it out, i bet it has to do with boost ve table
after searching the forum i found tout that some people have raised ETC by 200% I will try this later on today.
try this file
By OB.tun
Regards,
Odd Boy
will try it in a few!
This worked, thanks!
happy to hear that.....
Regards,
Odd Boy
Good deal...
Could you tell me what you altered to fix his problem? I am having same issue going into boost. Thanks ThomasOriginally Posted by odd boy
2004 silverado rcsb 2wd 5.3, 3.42's, 4l80e w/hd-2 and yank 3200, 01 LS6 cam, walbro 255hp intank pump, edge products 60lbs injectors, sts rear mount, EFILIVE with help of Nelsonperformance.
Posting Permissions
Reply With Quote