Just use the compare feature in the tune tool. It works like a charm.
Just use the compare feature in the tune tool. It works like a charm.
C6101 is a common culprit. This is raised by 200% by some to prevent the P1514 limp mode. Personally I would raise this value 200%. Log the max values on a map mimicking this table, then add 10 or 15% to this value. That way if you do have a throttle stuck, or similar issue it will still trip limp mode.
For the data in the map you would log G/CYL & multiply by 1000 to get milligrams.
The Tremor at AIR