Inspection Time and need Help?

[BowlingSS]

I am running Open Loop with COS 3. I am due inspection soon and need some help. I was told the P0103 MAF code will cause it to fail the ODBII inspection. I re-installed the MAF and hooked it back up but I still get the code. I know I need to change a few items but am not sure what. I was going to re-program my PCM with a old problem before open loop but thought if I could just change a couple of items it would be easier. What does everyone think? Anyone have this problem before inspection?

Will I need to go back to the stock OS to do this or can I just flash an old cal?

Bill

[SS-1500]

Bill, give yourself time to go thru the drive cycle. You're only permitted one not ready on an 01.

[BowlingSS]

Bill, give yourself time to go thru the drive cycle. You're only permitted one not ready on an 01.

The drive cycle is for the readiness tests but I am more worried about the P0130 code because of the OLSD.

Bill

[GMPX]

You get yearly inspections, we get speed camera's on just about every road....are they out to get us all??.

Cheers,
Ross

[wait4me]

Just set any code to x that shows up. It will make you pass instantly. as long as you delete the correct codes for the readyness tests.

[BowlingSS]

Just set any code to x that shows up. It will make you pass instantly. as long as you delete the correct codes for the readyness tests.

That is what I did. I setup a tune just for inspection. I tried it and no codes and all test completed right away. I will try it out in a day or so.

Bill

[BowlingSS]

Just passed the inspection. I will have to save this tune for next year.

Bill

[TAQuickness]

would you mind emailing me a copy of that tune? TAQuickness at Houston.RR.com

[BowlingSS]

would you mind emailing me a copy of that tune? TAQuickness at Houston.RR.com

Tune sent.

Bill

[joecar]

Bill,

I am interested in seeing this also, appreciate if you email it to me also: joecar at socal dot rr dot com

Thanks, happy Thanksgiving,
Joe