Page 13 of 13 FirstFirst ... 3111213
Results 121 to 127 of 127

Thread: how do i get my car not to idle so high

  1. #121
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Set them both to 140 degC.
    The Tremor at AIR

  2. #122
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Bad, I stuffed up with the frame numbers as you cannot remove the data with a filter applied. If you look at frame 5800 (no filter applied) you will see the type of lean spike that needs to be removed.
    The Tremor at AIR

  3. #123
    Member
    Join Date
    Jun 2009
    Posts
    79

    Default

    Quote Originally Posted by 5.7ute View Post
    Set them both to 140 degC.
    ok i set them to 140 degrees C. i don't know if i missed that step in the tutorial or what happened there.

  4. #124
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    No harm done. With a manual DFCO gets filtered out easily, but with an auto, if it is active you need to remove some of the bad data manually.
    The Tremor at AIR

  5. #125
    Member
    Join Date
    Jun 2009
    Posts
    79

    Default

    Quote Originally Posted by 5.7ute View Post
    Bad, I stuffed up with the frame numbers as you cannot remove the data with a filter applied. If you look at frame 5800 (no filter applied) you will see the type of lean spike that needs to be removed.
    i'm going to have to build a dashpage to see it, i think. i'll work on that tonight as i've never done one of those yet. i also want to learn how to post a screenshot like you guys do. when building the dashpage do i select all the PIDs like i did for the AutoVE?

  6. #126
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    With posting a screenshot, I just hit ctrl+printScrn with the screen displayed. Open paint in windows/accessories. Then in the edit tab select paste. This file you then save as. You may need an editor to reduce the file size under1.00mb for efilive to allow you to upload it. I use Irfanview.
    The Tremor at AIR

  7. #127
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Here is that log with the dfco manually removed.
    Attached Files Attached Files
    The Tremor at AIR

Page 13 of 13 FirstFirst ... 3111213

Similar Threads

  1. Car Wont Idle And Runs Rich At Idle ( Tune Inside)
    By mikeyayell in forum Gen III V8 Specific
    Replies: 13
    Last Post: January 8th, 2008, 03:17 PM
  2. High Idle
    By lucky1 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: January 1st, 2008, 03:14 PM
  3. High Idle
    By y2kws6 in forum Vortec V6/V8 Specific
    Replies: 8
    Last Post: June 1st, 2007, 01:18 PM
  4. High idle when car moving
    By tazinhawaii in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: May 5th, 2006, 06:01 PM
  5. What is your idle AFR??? My car wll not idle?
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: October 13th, 2005, 09:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •