I hate to be a PIA but same problem?

[Tordne]

Well, it was the latest as at that date

Right now we recommend running the pre-release version:
- 7.5.6 Build 125
- 8.1.2 Build 105 (which includes the 2.06.35 firmware)

If you are already running a version of 2.06.35 you will need to update the firmware using the EFILive Explorer firmware tab (Hapi won't consider it an update as the version is the same).

[slows10]

I am running 7.5.6 Build 125 and also 8.1.2 Build 105 So Im up to date. Ive been running this new release since it first came out. It worked fine for 5 days then it decided it didnt want to recognize my o/s.

[Blacky]

So then my firmware date is incorrect then? It says may 3 2010 . It should read June 30 2010.

Yes.

But as I asked earlier, if you send me the appropriate blx files it would be much easier for me to help you get this problem sorted out.
Regards
Paul

[slows10]

Paul I emailed the blx files to you. You should have them now. Sorry for the delay. Thanks, Keith

[GMPX]

Can you please Email me your .tun file? (send it to support@efilive.com)
I am going to flash an exact duplicate of your tune in to a PCM here and see if we can duplicate the problem. I've tested flashing on 3 different 4cyl PCM's and they seemed to flash ok.

Cheers,
Ross

[slows10]

just sent the tune file to ross. and sent the upload blx file to paul. Thanks for the help. Keith

[slows10]

Any updates ross?

[slows10]

I dont know what to do? I dont think there is anything major wrong with my truck. Ive got a horn relay DTC. I think thats from the Bcm not the Pcm. Also I have an intermittent airbag light on. But no codes show up for it. Ross tells me he flashed my tune into a pcm he has there and it worked 5 times. Does that mean my pcm is bad? Should I buy a new pcm and try that?

[Blacky]

I'm still investigating a possible solution.I should have some more info for you later today.

Regards
Paul

[slows10]

Alright, Thanks Keith