Looking to implement launch control in e38 is this possible can someone send me a file with 2010 c6 parameters.
Thanks
Tom
Looking to implement launch control in e38 is this possible can someone send me a file with 2010 c6 parameters.
Thanks
Tom
Launch control outside of a C6?
Torque can be limited per rpm point, but launch control needs ABS/EBC to work.
What car?
Unfortunately launch control is a function that has been built into the 2010 operating systems for Vette and Camaro (and others) and it works hand in hand with the ABS/EBC/ESP controller for that year. IIRC the '10 OS also works with the 09 ABS controller, but the 08 & earlier ABS/EBC controllers dont support launch control.
You could try torque limiting. This will limit throttle to whatever torque you calibrate for at the respective rpm. Not quite launch control, but it does help prevent wild wheel spin.
Though if you have a manual not sure whether the ECM figures which gear you are in and you can select TQ level per gear like an auto.
Thanks, how do you control the level in which the torque control comes on? I would love to have the car use the braking system instead of throttle as it does with active handling. This would keep the boost up, reducing the throttle would be ok if I can moderate it. I am just learning the software and have had a hard time finding a good tuner in my area who knows it. Time for school maybe.
Thanks again
Tom