unsupported ecotec pcm

[Gregs]

A few weeks ago I read a pcm from an ecotec motor and I sent it to support @ efilive as instructed. I know you guys are busy and might never get around to adding support for this car and thats fine but i was just wondering if there might be a time in the future when its supported. Thanks!

[slows10]

I thought all ecotec p12 were supported. Did they say to yuo it was an usupported platform? doh answered my own ? sorry.

[Tordne]

I received the file and forwarded it on the development and it is being worked on. If the calibration is similar to one that has already been mapped then it is a pretty straight forward thing. If (like yours) it is a bit different it just takes a bit longer, and of course needs to be fitted in with all the other development activity.

Post back here at the end of the week if you still haven't received anything from us and I'll see where it is at.

[Gregs]

awesome! thanks guys!

[MSURacing]

I have one as well OS:12593509

I think I sent it off a while ago, but I can send it out again.

[joecar]

Might want to send an email as a reminder (just in case the email spam filter zapped it).

[Gregs]

Any news?

[Tordne]

I have one as well OS:12593509

I think I sent it off a while ago, but I can send it out again.

Sorry, I don't have a record of receiving an email from you. Please resend to support@efilive.com.

[Tordne]

Any news?

I sent off an email for an update a couple of days back. For some reason there seems to be a bunch of these coming out of the wood work; there are about 5 cals that need to be mapped so apologies for the delay...

[Gregs]

oh no problem, it might be a while for me as our city is flooding so bad here. had to evacuate the house this morning it was so bad...so no tuning for me for a while