Results 1 to 2 of 2

Thread: KR maxes out in PE..?

  1. August 18th, 2010 #1
    samh_08
    samh_08 is offline
    Lifetime Member samh_08's Avatar
    Join Date
    Oct 2008
    Posts
    299

    Default KR maxes out in PE..?

    My car felt sluggish to me so I hooked up the V2 and started BBL. I probably am not logging everything I should've been but I wasn't planning on there being problems. It seems to me as though Im picking up knock as soon as I enter PE, and its maxed out instantly to the value in tables B6204 and B6205. Scan and current tune attached.

    Any ideas?
    SDAutoVE_KR.tunLS1B_0013.efi
    Reply With Quote Reply With Quote
  2. August 18th, 2010 #2
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Wideband indicates you are way overly rich (AFR 10.5 EQR 1.33 vs EQR 1.17), try to get it closer to commanded and see what it does...

    Question: how can we tell if this is rich knock or something else...? Doesn't really look like knock (can you hear it at all...?)

    Do you have an extraneous noise(s)...?

    I would try a full flash and see if it persists.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules