changing table axis
I'm working on an ecotec tune right now and i was wondering if there's anyway I can invert the ve table. I'm used to the ls1 ve table where map is on the horizontal axis and rpm is on the vertical axis. this ecotec pcm has rpm on the horizontal axis and map on the vertical axis. Its giving me a headache.
03 Silverado 5.3 ECSB 4x4 Z71
Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs
2010 Tahoe VVT AFM 5.3
Stock for now
Not possible sorry, the way it is shown in the software is the way it is represented in the calibration itself.
Andrew
EFILive Crew
You can "convert data between units".
Ctrl+Alt+Enter
It won't be a 3D or 2D table tho.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
You can copy with labels the data. Paste it into the conversion tool by hitting the create new table button in the conversion tab. Then you can transpose the axis in the conversion tool.
There is no 3d table in the conversion tool (would be a nice feature) but this may help you get your head around it.
Or CTRL+ALT+ENTER like mr.prick said. DOH.
The Tremor at AIR
awesome thanks guys i did the transpose thing worked like a charm.
03 Silverado 5.3 ECSB 4x4 Z71
Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs
2010 Tahoe VVT AFM 5.3
Stock for now
Posting Permissions
Reply With Quote