Results 1 to 5 of 5

Thread: Failed full reflash on previously licensed pcm & now no longer licensed???

  1. #1
    Junior Member bai78's Avatar
    Join Date
    Jun 2010
    Posts
    22

    Default Failed full reflash on previously licensed pcm & now no longer licensed???

    Well I've been doing some back & forth on another issue, thread link below:

    http://forum.efilive.com/showthread....255-code/page1

    After a little break I decide to give it another whirl on the tune. After I connect and want to flash on an already licensed pcm, I am told that my cable is not licensed to this pcm & to click that option. I read that this very thing happened to another member that was having trouble flashing his tune as well. Although I did not see a resolution for his isolated issue.


  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    First off please ensure you are running the latest software and FlashScan V2 firmware:
    - 7.5.6. Build 132: http://download.efilive.com/Software....132_Setup.exe
    - 8.1.2 Build 112: http://download.efilive.com/Software....113_Setup.exe
    - FlashScan V2 firmware 2.06.40 (included in V8 download)

    If this doesn't resolve the issue please email (support@efilive.com) the screenshot of the 'Flash->Get PCM Info' menu option in the tune tool.

    Cheers,
    Andrew
    EFILive Crew


  3. #3
    Junior Member bai78's Avatar
    Join Date
    Jun 2010
    Posts
    22

    Default

    I tried running the check for updates previously and did not receive an update. It was running on Build 130, Build 111, & the firmware was the latest 2.06.40.

    Thank you for the links. I will update ASAP and see if this will resolve my issue. Do I need to run a recover pcm?

    *UPDATE*

    The updates did not resolve my problem & have sent an email to support.
    Last edited by bai78; September 10th, 2010 at 12:14 PM.

  4. #4
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Hello bai78,

    Out of town on business .. trying to follow the Forum remotely when I get a chance ... sounds like you found part of the flash problem !!!

    Good luck getting the tuning software up and running. Once that is corrected, the reflash of the PCM should work. Sounds like the PCM may have never flashed properly prior.

    Regards,
    Taz

  5. #5
    Junior Member bai78's Avatar
    Join Date
    Jun 2010
    Posts
    22

    Default

    Safe travels Taz.

Similar Threads

  1. help needed...pcm asking to be licensed again
    By steve40 in forum General
    Replies: 7
    Last Post: June 16th, 2010, 12:51 PM
  2. Longer delays with BBL & other changes
    By Kevin Doe in forum FlashScan V2 BB Logging
    Replies: 8
    Last Post: September 25th, 2008, 08:02 AM
  3. "PCM is in an Unkown State" & "Reflash Failed"
    By foxySS in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 8th, 2006, 11:53 AM
  4. Licensed PCM now unlicensed?
    By PSWired in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: October 8th, 2005, 07:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •