Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 45

Thread: An easy 100 hp

  1. #31
    EFILive Reseller
    Join Date
    Nov 2005
    Posts
    359

    Default

    The only way to make the Allison fast learn is to reset or preset the TAP cells with a scan tool. At present, the Tech 2 is the tool of choice.

    Pulling the trans down at 50 mph Has never been proven to me to do anything for upshifts.
    www.kennedydiesel.com
    Specializing in Duramax Performance
    More than just a salesman-I use and test the products that I sell on a daily basis.
    Superflow Lie Detector in house

  2. #32
    Senior Member Wasted Income's Avatar
    Join Date
    Dec 2005
    Posts
    181

    Default

    Quote Originally Posted by Kennedy Diesel
    The only way to make the Allison fast learn is to reset or preset the TAP cells with a scan tool. At present, the Tech 2 is the tool of choice.

    Pulling the trans down at 50 mph Has never been proven to me to do anything for upshifts.
    Yep, and I remember someone posting a bulletin or something directly from Allison on dieselplace about how the 50mph first gear thing was a myth and did NOTHING to help the trans re-learn.
    2005 Silverado Duramax LLY - EFI Live Tuned
    1969 Chevrolet C-10 Pickup - Turbocharged 5.3L/4L80E - EFI Live Tuned
    1975 Avenger Jet Boat - 6.0L/Berkley pump - EFI Live tune in progress

  3. #33
    Junior Member
    Join Date
    Dec 2005
    Posts
    12

    Default

    Quote Originally Posted by Redline Motorsports

    Also 100 HP (rear wheel) tune will definately "limp" the tranny!
    That`s funny stuff! I have been running 110 or 135 hp Quad for 50,000 miles, and Never have limped on the 110. And before you say it isn't 110, My truck dyno`ed 403 rwhp on the 135 hp setting, and 378 rwhp on the 110 hp setting. So the 110 is really closer to 130 rwhp. While the 135 is more like 150rwhp. Oh yea, it dyno`ed 252 stock that same day. (AFE, and Banks exhaust)

  4. #34
    New Member touch racing's Avatar
    Join Date
    Jan 2006
    Posts
    2

    Default

    Wow since I had my SC IV put in I can't remember the last time I ran less than a 180 HP tune. Oh well I'm sure I will be back to the small tunes as soon as my laptop shows up.

  5. #35
    New Member
    Join Date
    Dec 2005
    Posts
    3

    Default

    Can someone send me the 100hp tune?

    Easymon4u@msn.com

  6. #36
    Junior Member TurboBeagleBuggy's Avatar
    Join Date
    Dec 2005
    Posts
    19

    Default

    100 hp LB7 tune in your inbox right now Joe.
    05' Silverado CC/SB
    EFI Live, PPE HOT, 285's, Isspro Gauges, Cobra 29 NWLTD w/ PA system and FireStick, toolbox, Houndsmen Deluxe dog box, and a trailer loaded with beagles that says "CAUTION FAST BEAGLES" on the back.

  7. #37
    New Member
    Join Date
    Mar 2006
    Posts
    5

    Default

    They files do not appear to be available for download any longer. If you'll send them to knalb@hotmail.com I will put them somewhere that is a bit more reliable than comcast.

  8. #38
    New Member
    Join Date
    Mar 2006
    Posts
    5

    Default

    Ok, I don't have the bin file just yet, but here is the tun:

    http://knalb.org/duramax/2002duramax100hptest.tun

  9. #39
    New Member titanspanker01's Avatar
    Join Date
    Feb 2006
    Posts
    7

    Default

    i give the 100hp tune a try send it to drmerboy@hotmail.com

  10. #40
    New Member
    Join Date
    Mar 2006
    Posts
    5

    Default

    Quote Originally Posted by titanspanker01
    i give the 100hp tune a try send it to drmerboy@hotmail.com
    You can download it from the link in my previous post. It will stay there untill the building burns down, or I finally get my project site up.

Page 4 of 5 FirstFirst ... 2345 LastLast

Similar Threads

  1. Easy efi live / lc-1 wireing Question
    By NASABlue in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: May 10th, 2008, 03:42 PM
  2. Replies: 0
    Last Post: February 6th, 2005, 03:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •