hey guy's,
i recently purchased a flashscanv2.for sure a rookie here.after modifying a calibration,how can i load it to the flashscan and flash the pcm with just the flashscan?sorry if this post is not in the right place.
thanks in advance
hey guy's,
i recently purchased a flashscanv2.for sure a rookie here.after modifying a calibration,how can i load it to the flashscan and flash the pcm with just the flashscan?sorry if this post is not in the right place.
thanks in advance
Format the SD card or internal memory with the V2>
Save the .tun as .ctd>
Drag and drop the .ctd into the Read folder of the SD card or internal memory of the V2 with EFILive Explorer.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
First install the latest V7 and V8 software (see below) and update V2 firmware to 2.6.40 ... then do what mr.prick said.
http://download.efilive.com/Software....132_Setup.exe
http://download.efilive.com/Software....113_Setup.exe
thanks for the fast replies,
i updated to the newest version of software,and followed mr.prick's directions.but,i get an error:0502 script file not found.i see the flash in the flashscan,but i get that error when i attempt to program.
Use the S&T software to select the PCM/ECM for BBF, see pic.
hey,
i got it!!thank you both for taking the time to help me out.
thanks