This is my first post on this forum. I just purchased a V2 and now would like to monitor A/F ratios. The NGK AFX was recommended by a friend, but I want to make sure it will work well with the V2. Thanks for your help.
This is my first post on this forum. I just purchased a V2 and now would like to monitor A/F ratios. The NGK AFX was recommended by a friend, but I want to make sure it will work well with the V2. Thanks for your help.
Hello Truckmaster,
Below is a recent thread from a member trying to get his NGK AFX setup. It's a long read ... but has a lot of detail and helpful material ...
http://forum.efilive.com/showthread....hlight=NGK+AFX
Regards,
Taz
Can you hook it up to a serial interface through the v2?
"All that is needed for the triumph of evil is that good men do nothing..."
It does not have serial connection, only analog.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Thank you!
"All that is needed for the triumph of evil is that good men do nothing..."