Results 1 to 8 of 8

Thread: 2.4L Cobalt Tuning Help

  1. #1
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default 2.4L Cobalt Tuning Help

    Does anyone have the scaling values and data required to run a LSJ 2BAR MAP sensor in a E67 ECU?

    This is an over the top performance Harrop Blower kit for a 2008 2.4L Cobalt Sport. Any help with this would be appreciated. It has a ton of stuff changed like IAT1 sensor, TB, etc and had custom harnesses made to adapt everything.

    It was tuned with Trifecta tuning before anything else was available and the OS has been changed

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

  2. #2
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default

    I found out this is not a changed OS

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Just enter in something around 188 - 200 in B2101 and key on engine off, check kPa reads 100, I assume you are at sea level in Miami
    If it's not right then just keep altering B2101.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default

    Although this would work, I am sure pulling the LSJ values from a stock calibration would be accurate.

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

  5. #5
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default

    My shop is like 25ft above

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

  6. #6
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default

    Quote Originally Posted by GMPX View Post
    Just enter in something around 188 - 200 in B2101 and key on engine off, check kPa reads 100, I assume you are at sea level in Miami
    If it's not right then just keep altering B2101.
    The proper values for those looking are:
    MAP Scalar: 270.59
    MAP Offset: -3.30

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

  7. #7
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Thanks Paul. -3.30 is odd, but if that's what GM have then we'll have to accept it.
    I no longer monitor the forum, please either post your question or create a support ticket.

  8. #8
    Senior Member
    Join Date
    Sep 2010
    Posts
    111

    Default

    I verified these values this morning when I got to the shop. They work perfect.

    This car now has a SIP sensor and I am trying to figure out what it is wired into to make it work, what it is calculating, etc

    Paul Meister
    EFI Calibrator/Managing Member, Torq Speedlab, LLC
    Specializing in late model Ford, GM and Dodge EFI Calibrations
    SCT, EFI Live, HP Tuners, FAST, BS3 and much much more

Similar Threads

  1. 2010 Cobalt SS Turbo
    By wpracing in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 1
    Last Post: January 6th, 2010, 07:58 AM
  2. 2008 Cobalt SS turbo
    By xtreme in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 11
    Last Post: March 23rd, 2009, 05:20 PM
  3. 2.2L cobalt 2008
    By duramaxdaddy29 in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 3
    Last Post: February 21st, 2009, 03:02 AM
  4. Support for 06 Cobalt ss/sc 2.0L
    By stkshkr in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: June 12th, 2008, 02:38 PM
  5. Cobalt .cal files
    By GMPX in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 4
    Last Post: December 23rd, 2007, 04:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •