Oil pressure PID

[odd boy]

Hi every one,

what PID should I log for oil pressure? I need it for LS-1, I found the one for E-38 under conditions.

thanks in advance

[Taz]

Try GM.ENGOILP ... I believe there are other PIDS for calculated oil pressure and oil pressure sensor voltage.


Regards,
Taz

[odd boy]

I found voltage, can we convert it to pressure?

[Taz]

If the scanner is connected to the LS1-B style PCM, or an appropriate VIN entered in the scanner ... GM.ENGOILP should be available. If the last PCM you scanned was an E38 ... scanner may be displaying PIDs appropriate for E38s.

OEM oil pressure gauge sender is usually 0 PSI (0 kPa) to 80 PSI (550 kPa). 0 PSI is equivalent to a resistance of 1 ohm, 80 PSI to 88 ohms. Can't recall the ohms / voltage relationship ... will need to look it up ... probably a way to convert if you are unable to select GM.ENGOILP

Regards,
Taz

[odd boy]

it won't be easy to relate Ohms with Volts, V=IR ========> volts = Current x Resistance

[Ninety8C5]

This works for the LS1_A PCMs.

[odd boy]

thx

[BustedTruck]

This works for the LS1_A PCMs.

I am having the same problem. I am a total newb just trying to learn. What do I do with the attatched file?

[joecar]

Copy it to: My Documents\EFILive\V7.5\User Configuration

[BustedTruck]

Copy it to: My Documents\EFILive\V7.5\User Configuration

Ok I have done that, but I still do not see the PID listed. What am I doing wrong?