Dead p10 pcm!!!

[blown4pt3]

Use LS1 PCM to do a CASE, select LS1 PCM and connect, then do a CASE. Heard it works from Jesse at Wait4Me, havent verified.

BBF can be done, save the tune as a .ctd in V7.5 then copy it to your V2 and set up the BBX section in V8 with P10 reading/flashing.

Thanks. I'll ry to find out more about the CASE before paying to have it done. The blazer goes in for an alignment and they quoted me 60 to 95 for a CASE relearn. The new pcm should be in tomorrow.

I'll try the BBX tuning. Hopefully it will work!