I recently went to clear an engine code with my v2 and it came up as no vehicle detected. I then inspected cable all seems fine where do I send it to get fixed thanks
I recently went to clear an engine code with my v2 and it came up as no vehicle detected. I then inspected cable all seems fine where do I send it to get fixed thanks
o6 silverado
efi live
air dog 150
transgo jr.
dual 4" exhaust
afe stage2 intake
Hey bud, check our cig lighter fuse..the port runs off of that fuse.
Already checked v2 is only thing that won't connect
o6 silverado
efi live
air dog 150
transgo jr.
dual 4" exhaust
afe stage2 intake
In the Scan Tool go to Edit\Properties\Connections …….. set your default to EFILive FlashScan V 2.5 (HAPI).
Sometimes when you update the software, these settings get changed.
Hopefully that helps ….
Regards,
Taz
Which V7 software version and which V2 firmware version...?
Okay I'll try that and get back to it
o6 silverado
efi live
air dog 150
transgo jr.
dual 4" exhaust
afe stage2 intake
Still nothing tried everything im pretty sure I gotta send it in.
o6 silverado
efi live
air dog 150
transgo jr.
dual 4" exhaust
afe stage2 intake