Results 1 to 5 of 5

Thread: Quick TC question

  1. #1
    Junior Member
    Join Date
    Mar 2010
    Posts
    38

    Default Quick TC question

    Ok having a big brainfart...when I am cruising on the highway in 4th say 65-70mph and slowly roll into the throttle the TC unlocks, how do I keep it locked longer?? The truck is strong enough to pull it a bit longer than it does.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    D1006 TCC Release Speeds 4th Gear

    Around the TP where the unlock occurs, lower this curve a little to keep the operating point above the curve.

    For TP above 80% leave the curve high since you want to unlock a stock style TCC at high engine torque.

    Check that you edit the right curve: normal, performance, cruise control, hot mode.

  3. #3
    Junior Member
    Join Date
    Mar 2010
    Posts
    38

    Default

    Thanks...forgot to mention this is a T42 4L60e with 2600 converter.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ah, then it would be table D4202 with the same name (I looked in a 2005 TCM file).

  5. #5
    Junior Member
    Join Date
    Mar 2010
    Posts
    38

    Default

    Thanks joecar, lowered 4>3 release by about 5mph from 50% TPS and down. By doing so got the results I was after.

Similar Threads

  1. Quick Question
    By duramax07tmd in forum General (Diesel)
    Replies: 2
    Last Post: March 16th, 2010, 02:06 PM
  2. Quick Chart Question
    By tatasta in forum Gen III V8 Specific
    Replies: 4
    Last Post: April 18th, 2009, 12:44 PM
  3. quick question
    By justin123 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: April 17th, 2009, 09:55 AM
  4. quick question! please help
    By nonnieselman in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: November 24th, 2008, 07:41 AM
  5. Quick OS question
    By ViolatorTA in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: February 12th, 2006, 11:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •