November 18th 2010 pre-release

[L31Sleeper]

The most convenient way to update the script files on your devices is to:

1. Connect your FlashSCan or AutoCal device to the PC.
2. Run the EFILive V8 Scan and Tune software.
3. Select the F5: BBX option.
4. Click on the [Read] button to read the current setup of the attached device.
5. Click on the [Program] button which will cause all outdated files to be updated.
6. It is not necessary to save the BBX Options file after performing the above procedure.
   

Regards
Paul

I'm getting $0194 Write Failure when I try to program the BBX / script file

[Blacky]

I'm getting $0194 Write Failure when I try to program the BBX / script file

That's usually caused by the CONFIG file system being full.
Try formatting the config file system (using the drop down option on the Program button) between steps 4 and 5.
Regards
Paul

[Blacky]

I have made changes that fixes the LS1 logging issues. Please see first post in this thread for the attached download.
Regards
Paul

Unfortunately the most recent fixes have not solved the LS1 Scan Tool problem. Further testing today has shown that the V7.5 Scan Tool is still not connecting correctly to the LS1 controller.
Regards
Paul

[L31Sleeper]

That's usually caused by the CONFIG file system being full.
Try formatting the config file system (using the drop down option on the Program button) between steps 4 and 5.
Regards
Paul

That worked, thanx

[izaks]

EMAIL sent

[pavetim]

I've downloaded the new 7.5 build 136 and v8 build 120 first off how do I download the latest firmware and bootblock? I got firmware 2.07.02 and bootblock 2.07.01 and is there already another build number? Also I tried to open up my previously saved tunes on v8 and it don't recognize them, can I get them to recognize those tunes?

[Tordne]

See this knowledgbase article for firmware updates: http://support.efilive.com/kb_articl...7243-SFGL-2949

Calibrations still need to be modified in the V7 software. V8 should open them and allow pass-thru flashing, but it is not performing calibration modification at this stage.

[oztracktuning]

any idea how far away full flash from autocal or V2 will be?
also remote linking of flashscan to autocal devices?

[Tordne]

Not sure on the full flash time line sorry. Remote linking however is not something we are implementing. The linking has to be done with the FlashScan V2 and AutoCal device connected (just like it is now).

[THEFERMANATOR]

There was mention before of being able to compare different OS #'s with the new V8 software. How far away will this be?