When should you update???
I go for months without getting on hear so ability to keep up with changes is minimal. I am currently running. Firmware 2.06.16 , Bootblock 2.06.02 , EFILive 7.5.6 build 99 and Scan and Tune 8.1.2 Build 75 . My question is, am I OK to keep using these or should I upgrade them. My current set up works great for me now.
THANKS!
00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.
If everything is working for you I guess there is no pressing "need" to upgrade. If you find that a new vehicle comes in an you can't read it just make sure you do update to the latest releases before seeking support for the vehicle from EFILive (as it may have already been released in an available update. Also if you start to have "strange" operational issues reading/flashing/logging then same goes, update first. We only provide support really for the latest software version as it is not practice to go back into what is obsolete or superseded code and remedy.
Andrew
EFILive Crew
Thanks! I work on the same old 411 pcm's all the time so it is still working fine. Thanks for the quick reply.
00 GMC,LQ4, Jarrett Faggart pistons, callies rods, Ebay studs, LS9 gaskets, 317's, KBRacing KIT, PT76/75, treadstone intercooler,Eboost2, dual walbro, FIC 75lb, br7ef, Trutrac, Shaftmasters Shaft, 3.5" DP w/4" magnaflow dumped, turbo blanket, Circle D 3200, Jake's built 4l80w/brake, hydroboost, EFILive v2,Lunati dual springs,222/226 cam, cal-tracs, QA1 front shocks, Street/strip Bogarts,Drum swap, Alky-control,MSD8733 936 HP to the tire DD.
Posting Permissions
Reply With Quote