Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: flash scan for gauges

  1. #1
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default flash scan for gauges

    how would i go bout settin up my flash scan for temp gauges

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What year/model/vehicle...?
    What temps (coolant, transmission)...?

    Software scantool:
    On the Dashboard, goto Dash A, and do rightclick->Add and select a gauge, or do rightclick>Properties on an existing gauge and change its pid.

    V2 BBL:
    Run the V8 Scan&Tune software, select Black Box Settings, create a pid list for your PCM/ECM/TCM including temp.

  3. #3
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    03 2500 hd 6.6 for temporary gauges like speed trans temp coolant my cluster is messed up i wanna just use the v2 and not have to have the lap top in the truck the battery on the lap top might last 15 min

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    BTW: welcome to the forum.

    In that case you need this:
    Quote Originally Posted by joecar View Post
    ...
    V2 BBL:
    Run the V8 Scan&Tune software, select Black Box Settings, create a pid list for your PCM/ECM/TCM including temp.
    See here, starting from post #5: showthread.php?14351-BBL-PIDs-V2

  5. #5
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    now where is the scan and tune or how do you get thier the only thing i can find is the scan and tune tools

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You also have to install V8 software from >here<

    [ also, you should probably update your V7 software ]

    V8 software gives you two software tools: EFILive Explorer and Scan&Tune.

    More info:
    showthread.php?14351-BBL-PIDs-V2
    showthread.php?13836-New-V2-help-find-exlporer post #4

  7. #7
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    its telling me to terminate the hapi process how do i do that

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Reboot your PC and start again.

  9. #9
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    ok ive got to programing the v2 and it says error $0003: usb device noy opened what to do now thanks for the help

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I contacted Tech Support about Error $0003.

    Which V8 software build version have you got installed...?

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Flash Scan V2 problems
    By loafycleetus in forum FlashScan V2
    Replies: 4
    Last Post: April 20th, 2009, 01:51 AM
  2. Replies: 12
    Last Post: March 17th, 2005, 08:07 AM
  3. Few flash scan questions
    By Dirk Diggler in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 25th, 2004, 03:25 PM
  4. Flash scan question
    By Dirk Diggler in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: July 3rd, 2004, 03:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •