flash scan for gauges

[Tordne]

I have never actually seen a $0003 error occur. Are the drivers installed and the device shown OK in Device Manager? If you go into the Tune Tool with FlashScan connected do you get valid license data when going to the 'Help->FlashScan V2 / AutoCal V2 VIN Licensing' menu option?

[crash85]

the one you posted earlier above

[Tordne]

the one you posted earlier above

Sorry, I don't know what you mean by this?

[crash85]

yes i do have a valid license

[joecar]

...
Which V8 software build version have you got installed...?

the one you posted earlier above

Sorry, I don't know what you mean by this?

He means the software build version.

[Tordne]

What I'm really wanting to know is if your software can see and communicate with the FlashScan V2 device. If you go to the 'Help->FlashScan V2 / AutoCal V2 VIN Licensing' menu option in the Tune Tool with FlashScan connected it "should" retrieve the serial number and VIN license details, proving that it is all good (or not).

[crash85]

yea ive got that Its all right ive tuned my three trucks.

[crash85]

what else would i need to do to get this to work as gauges

[Tordne]

Just going 07:30 here .

Confirm software and firmware versions for me?

If using the stable software from the website you should be:
- 7.5.6 Build 133
- 8.1.2 Build 115
- 2.06.41 FlashScan V2 firmware

If using the latest pre-release you should be:
- 7.5.6 Build 138
- 8.1.2 Build 126
- 2.07.03 (Nov 22, 2010) FlashScan V2 firmware

If you aren't on either of these versions we'll need you to upgrade, see these notes:
- Software updates
- Firmware updates

Cheers,

[crash85]

iam going to update them againto make sure ive got them