I had been having intermittent connection problems between my EFILive V2 and my computer since I have had it. As long as I didn't move the EFILive it was fine so I never thought to much about it till the other day. I was in the middle of a complete ECM reflash and I bumped the thing and lost the connection, fortunately I was able to reflash and the ECM was OK but I didn't want to take any more chances.

I got a different USB cable to try that, no change. Thought I'd take the case apart on the EFILive and see and this is what I found.

Click image for larger version.  Name: DSC05767m.jpg  Views: 291  Size: 173.0 KB  ID: 9499Click image for larger version.  Name: DSC05770m.jpg  Views: 313  Size: 162.5 KB  ID: 9500

Now I am no electronics guru but if I had to guess I am assuming those 4 studs off of the USB plug should be soldered to the board, right? Anyway I thought I'd post it up and see if anyone else had had similar problem and if there was a known recall that I happened to miss. I have no big deal with trying to solder the pins and seeing if that fixes my problem but will wait to see what others have to say...